End transition layout端头转接与组合
The assembly organizes a transition or combined connection, with end directions, transition sections and fixing arranged around the equipment positions.组件以转接或组合形式组织连接，可围绕两端设备位置安排端头方向、过渡段与固定。
Anderson Interface Cable ProjectAnderson接口电缆项目
Powerpole to 2-Way Banana Plug Power HarnessPowerpole转双路香蕉插头电源线束
Powerpole to 2-Way Banana Plug Power Harness combines end transition layout, plug-in connection end. Interface, circuit and installation data guide dimensions, material selection and sample review.Powerpole转双路香蕉插头电源线束的结构重点包括端头转接与组合、插接式端头。接口、电路与安装资料将作为尺寸、物料和样品制作的确认依据。
- Interface and circuit review接口与回路对应审核
- Length and installation configuration线长与安装结构定制
- Manufacture from approved sample样品确认后组织制造
CONSTRUCTION结构解析
Connection structure and design details连接结构与设计要点
Use the powerpole to 2-way banana plug power harness form as a starting point and confirm these design points against drawings and the actual equipment.以Powerpole转双路香蕉插头电源线束的结构形式为起点，结合图纸和实际设备确认以下设计要点。
Plug-in connection end插接式端头
The end uses a plug-in form, with clearance arranged for insertion, removal and cable bends.端头采用插接形式，可围绕安装位置安排插入、退出及线缆弯曲空间。
Interface and function review接口与功能确认
Check color against mechanical keying for the exact series颜色需结合具体系列的机械键位核对
Installation and acceptance安装与验收
One housing may use contacts for different wire sizes同壳体可配不同线径接点
CONFIGURATION结构与选配
Construction & customization options结构与定制配置
The table describes the construction and available configuration choices. Materials, dimensions, circuits and inspection requirements are agreed for each project.以下说明展示结构与可配置内容。具体材料、尺寸、电路和检验要求按项目确认。
| Exact Anderson series, housing and contactsAnderson具体系列、壳体与接点 | Define housings and matching contacts for the exact Anderson family.按具体Anderson系列确定壳体及配套接点。 |
|---|---|
| Color keying, polarity and mating pair颜色键位、极性与插合组合 | Confirm colour together with mechanical keying and polarity.颜色须结合机械键位和极性一并确认。 |
| Contact conductor range, plating and tools接点导体范围、镀层与工具 | Match conductor range, plating and tooling to the contact part documents.接点导体范围、镀层和工具按料号文件匹配。 |
| Continuous current, mating duty and temperature rise持续电流、插拔条件与温升 | Specify continuous current, temperature-rise conditions and permitted mating duty separately.分别规定持续电流、温升条件与允许插拔工况。 |
| Installation and operating boundary安装与使用边界 | Supply the manufacturer and complete connector series or part number, mating-side photograph and contact view, circuit and polarity drawing, continuous and peak load, voltage, wire size and cable length, opposite-end interface, installation environment, quantity and acceptance criteria. Identify auxiliary contacts or battery-monitoring circuits separately.请提供制造商及完整接口系列／料号、对插侧照片与触点视图、回路和极性图、连续与峰值负载、电压、线径与长度、另一端接口、安装环境、数量和接收标准。辅助触点或电池监测回路须单独标明。 |
| Sample and release basis样品与放行依据 | The approved inputs become a controlled connector-and-contact BOM, cable drawing, polarity map, assembly instructions and first-article checklist. The inspection scope can cover wire identity, crimp geometry, contact retention, housing keying, cable length and agreed electrical checks. Continuity alone cannot prove rated-load temperature, charging-system compatibility or equipment safety.批准资料将转成受控的壳体与触点物料表、线缆图、极性表、装配指引和首件核对清单。检验范围可包括线号、压接几何、触点保持、壳体防错、长度及约定电气项目。导通合格不能单独证明额定负载温升、充电系统兼容或设备安全。 |
APPLICATIONS连接的应用
Application directions应用方向
These are connection directions for project discussion. Suitability depends on interfaces, circuits, installation conditions and project validation; configuration can be adapted to the equipment.以下为可讨论的连接方向。实际适用性取决于接口、电路、安装环境和项目验证，可按设备需求调整。
Housing and contact combinations壳体与接点配套
Define housings, contacts and locking parts as a matched series. Color and a similar outline can aid identification but cannot replace mating drawings. Define housings and matching contacts for the exact Anderson family.壳体、接点与锁止件需按具体系列成套定义，外壳颜色或相近轮廓只能帮助识别，不能代替对插图纸。选配时，按具体Anderson系列确定壳体及配套接点。
Battery and removable power connections电池与可拆电源连接
Define polarity, continuous and peak load, and permitted connection conditions. Record auxiliary signals separately from the main power path. Confirm colour together with mechanical keying and polarity.电池连接要明确极性、持续与峰值负载以及允许插拔条件，辅助信号回路与主电源路径应分别记录。选配时，颜色须结合机械键位和极性一并确认。
Internal machine connections and service设备机内连接与维护
Keep internal connections clear of working zones and moving parts. Allow appropriate cable length between supports, interfaces and service paths. Match conductor range, plating and tooling to the contact part documents.设备机内连接要避开加工区与运动部件，并在固定点、接口和检修路径之间保留合理线缆余量。选配时，接点导体范围、镀层和工具按料号文件匹配。
Contact and fine-wire termination端子与细线端接
Contact selection depends on conductor construction, insulation diameter and tooling limits. Set wire preparation and crimp inspection for the actual contact part. Specify continuous current, temperature-rise conditions and permitted mating duty separately.端子选择同时取决于导体结构、绝缘外径和工具范围；备线尺寸与压接检查应落到实际接点型号。选配时，分别规定持续电流、温升条件与允许插拔工况。
Equipment power-distribution branches设备电源分配支路
Select power branches from actual loads, circuit protection and route length. Include termination, retention and service positions in the wiring definition. Define housings and matching contacts for the exact Anderson family.供电分支以实际负载、回路保护和线长为选配依据，端头、固定和检修位置也需列入布线定义。选配时，按具体Anderson系列确定壳体及配套接点。
Vehicle service connections车辆检修转接位置
Provide access for mating and service tools. Record end-face views and cable retention after service; appearance alone does not establish interchangeability. Confirm colour together with mechanical keying and polarity.可拆卸尾线应保留插拔与工具空间，并记录端视图和维修后的固定方式，避免只凭外观确定替换关系。选配时，颜色须结合机械键位和极性一并确认。
ENGINEERING & PRODUCTION工程与制造
Adapt the connection to your equipment.围绕设备，调整连接细节。
Touched by me, better it’ll beTouched by me, better it’ll be
Custom wire harness manufacturing in China中国工厂 · 定制线束制造
Our China factory supports anderson interface cable project projects through custom wire harness manufacturing and OEM/ODM development. Interface, circuit and installation data guide material selection, sample builds and manufacturing-document approval before repeat production.Super Smile-Tech 中国工厂围绕Anderson接口电缆项目的项目需求提供定制线束制造与 OEM/ODM 支持。我们从接口、电路与安装资料开始，协同物料选配、样品制作和制造文件确认，再按批准要求组织重复生产。
Check the interface and matching parts核对接口与配套件
Define housings and matching contacts for the exact Anderson family. Check color against mechanical keying for the exact series.按具体Anderson系列确定壳体及配套接点。 颜色需结合具体系列的机械键位核对。
Define cable and installation conditions定义线材与安装条件
Confirm colour together with mechanical keying and polarity. One housing may use contacts for different wire sizes.颜色须结合机械键位和极性一并确认。 同壳体可配不同线径接点。
Set processing and acceptance requirements确定加工与验收要求
Match conductor range, plating and tooling to the contact part documents. Confirm no-load and load-break mating requirements separately.接点导体范围、镀层和工具按料号文件匹配。 不带载与带载插拔要求分别确认。
PRODUCT QUESTIONS产品问答
Product & customization questions产品与定制常见问题
Does matching colour always ensure mating?颜色相同就一定能够插合吗？
Check color against mechanical keying for the exact series. Define housings and matching contacts for the exact Anderson family.颜色需结合具体系列的机械键位核对。按具体Anderson系列确定壳体及配套接点。
Can one housing accept contacts for different wire sizes?同一壳体可否装不同线径接点？
One housing may use contacts for different wire sizes. Confirm colour together with mechanical keying and polarity.同壳体可配不同线径接点。颜色须结合机械键位和极性一并确认。
Must loaded and unloaded mating conditions be distinguished?带载和不带载插拔需要区分吗？
Confirm no-load and load-break mating requirements separately. Match conductor range, plating and tooling to the contact part documents.不带载与带载插拔要求分别确认。接点导体范围、镀层和工具按料号文件匹配。
Start with your interface and installation requirements从您的接口与安装需求开始
Share mating interfaces, a circuit table, target lengths or a sample for the powerpole to 2-way banana plug power harness. We can use them to review configuration and sample requirements.提供Powerpole转双路香蕉插头电源线束的对插接口、回路表、目标长度或参考样品，我们据此梳理选配与样品确认事项。