Branched end layout分支端头布局
Conductors separate toward different ends, creating individual connection points. Branch lengths and directions can follow the equipment modules.导线向不同端头分出，形成独立接入位置。各支路可围绕设备模块分别安排长度与方向。
Spiral Coiled Cable螺旋电缆组件
Vending Machine Branch Coiled Pigtail自动售货机分支螺旋尾线束
Vending Machine Branch Coiled Pigtail combines branched end layout, coiled or spiral form, pigtail connection form. Interface, circuit and installation data guide dimensions, material selection and sample review.自动售货机分支螺旋尾线束的结构重点包括分支端头布局、卷绕或螺旋形态、尾线连接形式。接口、电路与安装资料将作为尺寸、物料和样品制作的确认依据。
- Branched end layout分支端头布局
- Coiled or spiral form卷绕或螺旋形态
- Pigtail connection form尾线连接形式
CONSTRUCTION结构解析
Connection structure and design details连接结构与设计要点
Use the vending machine branch coiled pigtail form as a starting point and confirm these design points against drawings and the actual equipment.以自动售货机分支螺旋尾线束的结构形式为起点，结合图纸和实际设备确认以下设计要点。
Coiled or spiral form卷绕或螺旋形态
The cable is arranged in a coiled or spiral form, with straight tails and ends placed for storage or connection positions.线缆以卷绕或螺旋形态排列，直线尾段与端头可以结合收纳或连接位置安排。
Pigtail connection form尾线连接形式
A lead section extends behind the connector, allowing length, further termination and support to follow the equipment connection.插接端后保留引线段，便于按设备接线位置确定长度、后续端接与支撑。
CONFIGURATION结构与选配
Construction & customization options结构与定制配置
The table describes the construction and available configuration choices. Materials, dimensions, circuits and inspection requirements are agreed for each project.以下说明展示结构与可配置内容。具体材料、尺寸、电路和检验要求按项目确认。
| Retracted length, working extension and coil diameter收缩长度、工作伸长与圈径 | Record retracted length, normal working extension and coil diameter separately.分别记录收缩长度、正常工作伸长和圈径。 |
|---|---|
| Coil hand, straight-tail length and end orientation螺旋方向、直尾长度与端头方向 | Define coil direction, straight-tail lengths and both cable exits.确定螺旋方向、直尾长度及两端出线方向。 |
| Conductor, jacket and retraction-force conditions导体、护套及回复力条件 | Select conductor and jacket construction for restoring force and operating duty together.导体与护套结构按回复力和工况共同选择。 |
| Extension frequency, cycle target and fixing伸缩频率、循环目标与固定方式 | Specify extension frequency, cycle target and fixing conditions at both ends.注明伸缩频率、循环目标和两端固定条件。 |
| Installation and operating boundary安装与使用边界 | Provide retracted and working dimensions, coil geometry, both endpoints, circuits, restoring force, environment and motion profile.请提供收缩与工作尺寸、线圈几何、两端接口、回路、回弹力、环境与动作谱。 |
| Sample and release basis样品与放行依据 | Release records the cable build, coil dimensions, tail directions, endpoints, forming conditions and agreed dimensional, electrical and cycle evidence.放行文件记录线缆结构、线圈尺寸、尾段方向、端点、成型条件与约定的尺寸、电气及循环证据。 |
APPLICATIONS连接的应用
Application directions应用方向
These are connection directions for project discussion. Suitability depends on interfaces, circuits, installation conditions and project validation; configuration can be adapted to the equipment.以下为可讨论的连接方向。实际适用性取决于接口、电路、安装环境和项目验证，可按设备需求调整。
External interfaces on portable equipment便携设备的外部接口
Consider handling, plug grip and cable bends together. Align the exit direction with the device position during use. Record retracted length, normal working extension and coil diameter separately.便携设备连接要同时考虑操作手势、插头握持和尾部弯曲空间，线缆出口方向应与实际使用姿态协调。选配时，分别记录收缩长度、正常工作伸长和圈径。
Routing and retention on moving equipment移动设备的走线与固定
Define travel, speed and retention at both ends of moving connections. Set separate targets and validation conditions for bending and torsion. Define coil direction, straight-tail lengths and both cable exits.移动连接需明确动作行程、速度和两端固定，动态弯曲与扭转应分别设定目标和验证条件。选配时，确定螺旋方向、直尾长度及两端出线方向。
Cable exits and nearby support电缆出口与近端支撑
Keep bending loads away from contacts through appropriate rear support. Review exit angle, retention distance and boot dimensions with the enclosure. Select conductor and jacket construction for restoring force and operating duty together.端头后方的支撑要避免把弯折载荷直接传到接点，出线角度、固定距离和尾套尺寸需与机壳一起评审。选配时，导体与护套结构按回复力和工况共同选择。
Module wiring within enclosures机箱内部的模块配线
Coordinate board positions, module removal and wire bends within the enclosure. Preserve insulation clearance and support behind each termination. Specify extension frequency, cycle target and fixing conditions at both ends.机箱内部配线需要协调板卡位置、模块拆装和导线转弯空间；端接后的绝缘与支撑不能被外壳挤压。选配时，注明伸缩频率、循环目标和两端固定条件。
Detachable circular connections可拆卸圆形连接
Check gender, keying, coupling and end-face views together. Equal contact counts do not replace confirmation of the exact series and part numbers. Record retracted length, normal working extension and coil diameter separately.圆形接口需要同时核对公母、键位、锁紧方式和端视图，针数相同并不能替代完整系列与料号确认。选配时，分别记录收缩长度、正常工作伸长和圈径。
Instrument inputs and measurement leads仪器输入与测量引线
Start measurement leads from signal type, input conditions and grounding. Select pairs and shields for the actual measurement range and noise target. Define coil direction, straight-tail lengths and both cable exits.测量引线以信号类型、输入条件和接地方式为起点，线对与屏蔽选择需要对应实际量程和噪声目标。选配时，确定螺旋方向、直尾长度及两端出线方向。
ENGINEERING & PRODUCTION工程与制造
Adapt the connection to your equipment.围绕设备，调整连接细节。
Touched by me, better it’ll beTouched by me, better it’ll be
Custom wire harness manufacturing in China中国工厂 · 定制线束制造
Our China factory supports spiral coiled cable projects through custom wire harness manufacturing and OEM/ODM development. Interface, circuit and installation data guide material selection, sample builds and manufacturing-document approval before repeat production.Super Smile-Tech 中国工厂围绕螺旋电缆组件的项目需求提供定制线束制造与 OEM/ODM 支持。我们从接口、电路与安装资料开始，协同物料选配、样品制作和制造文件确认，再按批准要求组织重复生产。
Define termination and protection boundaries确定端接与保护边界
Record retracted length, normal working extension and coil diameter separately. Maximum extension is not the continuous working length.分别记录收缩长度、正常工作伸长和圈径。 最大拉伸长度不等于长期工作长度。
Match dimensions and operating motion配合尺寸与使用动作
Define coil direction, straight-tail lengths and both cable exits. Coiled appearance does not establish extension-cycle life.确定螺旋方向、直尾长度及两端出线方向。 卷绕外观不能证明耐伸缩寿命。
Verify processing and finished condition验证工艺与成品状态
Select conductor and jacket construction for restoring force and operating duty together. Do not transfer extension strain directly to terminals.导体与护套结构按回复力和工况共同选择。 伸缩应力不得直接传至端子。
PRODUCT QUESTIONS产品问答
Product & customization questions产品与定制常见问题
Is maximum extension the same as long-term working reach?最大拉伸长度等于长期工作长度吗？
Maximum extension is not the continuous working length. Record retracted length, normal working extension and coil diameter separately.最大拉伸长度不等于长期工作长度。分别记录收缩长度、正常工作伸长和圈径。
Does coil appearance establish cycle life?卷绕外观能证明循环寿命吗？
Coiled appearance does not establish extension-cycle life. Define coil direction, straight-tail lengths and both cable exits.卷绕外观不能证明耐伸缩寿命。确定螺旋方向、直尾长度及两端出线方向。
Can the terminals directly carry the coiled-cord tension?卷线拉力可以直接由端子承受吗？
Do not transfer extension strain directly to terminals. Select conductor and jacket construction for restoring force and operating duty together.伸缩应力不得直接传至端子。导体与护套结构按回复力和工况共同选择。
Start with your interface and installation requirements从您的接口与安装需求开始
Share mating interfaces, a circuit table, target lengths or a sample for the vending machine branch coiled pigtail. We can use them to review configuration and sample requirements.提供自动售货机分支螺旋尾线束的对插接口、回路表、目标长度或参考样品，我们据此梳理选配与样品确认事项。