Electricians working at an industrial electrical panel
PRODUCT CATEGORY · INSIDE THE MACHINE

Equipment Wire

Specify the electrical path from panel entry to machine endpoint

Coordinate MTW, AWM, hook-up wire, conductor, insulation, routing, terminals and machine-level evidence instead of selecting by colour or gauge alone.

Ask About This Product TypeFind Models & Material Part NumbersBack to Products
01 / 14
Mixed-interface equipment harness
01
Mixed-interface equipment harness
Circular-sheath equipment harness
02
Circular-sheath equipment harness
Multi-connector control harness
03
Multi-connector control harness
Tape-wrapped robotic harness
04
Tape-wrapped robotic harness
D-Sub and circular interface harness
05
D-Sub and circular interface harness
White Flat Plug Signal Branch Harness
06
White Flat Plug Signal Branch Harness
DC Motor Dual Plugs Harness
07
DC Motor Dual Plugs Harness
Stepper Motor White Plug Harness
08
Stepper Motor White Plug Harness103H7126-17E1
SIL Single-Row Plug Stepper Motor Harness
09
SIL Single-Row Plug Stepper Motor Harness
Flat-sheath signal branch harness
10
Flat-sheath signal branch harness
Green Terminal Block & Circular Connector Harness
11
Green Terminal Block & Circular Connector Harness
Power Connector to Ring-Terminal Braided Harness
12
Power Connector to Ring-Terminal Braided HarnessBMC2S
Blue Connector Multi-Branch Equipment Harness
13
Blue Connector Multi-Branch Equipment Harness
Corrugated-Conduit 3-Branch Appliance Harness
14
Corrugated-Conduit 3-Branch Appliance Harness
ONE ELECTRICAL PATH, THREE INSTALLATION BOUNDARIES

Equipment wire is not an appearance category

Equipment wire carries power, control, safety and sensor circuits inside machines and industrial control panels. Its suitability depends on where the conductor is installed, how it is protected and which standard governs the completed equipment.

UL 1063 machine-tool wire, UL 758 appliance wiring material and field-installed wiring are different product and installation scopes. IEC 60204-1 begins at the connection of the supply to a machine's electrical equipment; the project must therefore map every circuit across panel, machine and moving boundaries.

01PANEL02MACHINE03MOVING ENDPOINT

As a wire crosses a boundary, its applicable standard, mechanical protection, termination and validation questions can change.

01

LOCATE THE WIRE BEFORE NAMING IT

Machine Boundaries, MTW and AWM

Start with the machine boundary, not the wire catalogue
Industrial process equipment marks the machine-level boundary.

Start with the machine boundary, not the wire catalogue

Equipment wire can sit inside an industrial control panel, pass through a machine frame or terminate at a motor, valve, sensor or operator station. Those positions do not automatically share one installation rule. Document the supply connection, panel boundary, fixed raceway, exposed segment and service disconnect before choosing a product designation.

MTW and AWM identify different approval paths
Industrial wire reels illustrate controlled wire identity and source.

MTW and AWM identify different approval paths

Machine Tool Wire is covered by UL 1063. Appliance Wiring Material is covered by UL 758 and is identified by a specific style and conditions of acceptability. Familiar labels such as UL 1015 or UL 1007 must be checked as exact AWM styles, not treated as universal synonyms for every machine wire. Marking, manufacturer file and intended use matter when approving an equivalent.

02

THE CIRCUIT DEFINES THE COPPER; THE ENVIRONMENT DEFINES THE INSULATION

Conductor Calculation and Insulation Construction

Size the conductor from the complete circuit
Copper conductors illustrate material and stranding decisions.

Size the conductor from the complete circuit

Current, duty cycle, route length, voltage-drop target, ambient temperature, grouping and terminal resistance all affect conductor selection. IEC 60228 defines conductor classes and resistance requirements for applicable finished cables, but the cable product standard still determines applicability. Fine stranding may improve handling; it does not independently establish ampacity or dynamic life.

Insulation is a system of ratings and exposures
Machine cabling illustrates exposure and protective construction.

Insulation is a system of ratings and exposures

PVC, cross-linked polyolefin, nylon-covered constructions and other compounds can differ in temperature, voltage, oil, chemical, abrasion and flame performance. A higher temperature number does not automatically make a wire suitable. Review the exact construction, print legend, minimum wall, outside diameter and compatibility with terminals, seals and wire duct.

03

AFTER INSTALLATION, THE ROUTE BECOMES PART OF THE DESIGN

Control-Panel Routing and Machine Motion

Fixed routing still needs mechanical control
Automated equipment illustrates fixed routing around machine components.

Fixed routing still needs mechanical control

Inside a panel or machine, wire duct fill, bend location, clamp spacing, sharp edges, heat sources and separation between power and sensitive signal circuits influence reliability and service access. Routing should preserve terminal visibility and allow a component to be replaced without pulling adjacent circuits or hiding identification.

Movement changes the cable question
A production line illustrates movement and repeated machine cycles.

Movement changes the cable question

A cabinet door, moving head, robot axis or sliding module introduces bend, torsion, acceleration and repeated cycle requirements. The moving length, neutral axis, minimum radius, support points and cycle profile must be defined. A wire that is flexible during installation is not automatically a continuous-flex or drag-chain cable.

04

A CONTROLLED COMBINATION CREATES THE TERMINATION; COMPLETE EVIDENCE CREATES RELEASE

Termination System and Machine-Level Validation

Terminal, tool and wire must be released together
Panel service illustrates tool-controlled electrical work.

Terminal, tool and wire must be released together

Ferrules, open-barrel contacts, ring and fork terminals, quick-connects and board connectors each impose conductor, insulation and strip requirements. The approved combination includes contact part number, wire range, applicator or tool, crimp geometry, pull criteria, insertion and terminal retention. Visual appearance alone cannot approve a crimp.

Release evidence belongs to the finished machine circuit
Electrical measurement illustrates project-defined verification.

Release evidence belongs to the finished machine circuit

Incoming identity and marking control the material. Cut, strip, crimp, label and routing checks control the process. The finished harness may then require continuity, insulation resistance, dielectric strength, protective-bonding continuity, pull, temperature-rise or functional checks defined by the project. A recognized wire component does not certify the complete machine.

Quotation and engineering inputs

  1. 01Destination market, machine type and governing equipment standard
  2. 02Circuit list with voltage, current, duty, length and protection
  3. 03Panel, machine, exposed and moving route map
  4. 04Exact MTW, AWM style or other wire designation and marking
  5. 05Terminal, connector, wire duct, gland and protection references
  6. 06Drawing, sample, quantity, change control and validation limits

Release records should lock the wire source and marking, conductor and insulation construction, cut and strip details, termination combination, routing, traceability and agreed electrical and mechanical checks.

Equipment wire questions

Is equipment wire the same as building wire?

No. Product marking, installation location and governing code determine where a wire may be used.

Can UL 1015 replace any MTW wire?

Not by name alone. Compare exact approvals, ratings, construction, use conditions, terminal compatibility and project requirements.

Does a stranded conductor mean continuous-flex use?

No. Continuous movement requires a cable construction, routing method and cycle validation intended for that motion.

What should be checked after a wire-source change?

Review marking, approval file, conductor resistance and stranding, insulation dimensions and properties, terminal fit, process settings and affected validation.

Image sources and technical references

Images explain machine, material, routing, termination and validation concepts; they do not represent our production parts, test results or machine certification.

View sources and applicability notes

PART NUMBER / INTERFACE / MATERIAL

Models, Part Numbers & Sourcing

Find a cable model or material part number, then send it for a custom replacement or original-part sourcing review.

Back to Top ↑

240 references · Search by brand or part number

Connector & Material Part Numbers

Category-specific material references; the final BOM follows the approved configuration.

  • LAPP

    4190107K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    100012602

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.01.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190115K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50513

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130-40-04-UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190124K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50530

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-05-04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190127K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50543

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.02.12.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190134K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50549

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-05-04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160192

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50587

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190108K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50630

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.02.36

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190132K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50684

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190117K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50816

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.03.INI

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190125K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50864

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190135K

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50957

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160217

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50982

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.01.03

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160239

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51003

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.01.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160242

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51284

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.01.18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160292

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51354

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.03.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160316

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51440

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-05-05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160317

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51449

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.03.05.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160330

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51465

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-07-12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160392

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51477

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160412

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51641

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.03.15

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160418

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51856

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.02.25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160419

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50511

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.04.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160420

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50548

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160421

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50650

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.03.INI

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160422

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50956

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160423

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51282

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160424

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51445

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160425

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51552

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.04.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160427

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50516

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-05-18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160428

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50728

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.05.03.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160429

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51324

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-07-25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160433

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51680

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160434

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50613

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.03.18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160492

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51464

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.03.05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160542

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50817

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.05.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160592

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50531

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.07

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160666

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50580

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.06

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160667

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51359

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.02.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160692

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF51466

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.03.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4160792

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50958

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.02.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190101

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF50983

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.06.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190102

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • Turck

    RF52081

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-07-07

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190103

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.05.04.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190104

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-15-22

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190105

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190106

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.03.25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190107

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.05.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190108

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.07.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190109

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.09

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190110

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.07

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190111

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.03.07

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190112

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.PLUS.01.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190113

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.02.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190114

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.07.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190115

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-07-12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190116

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.05.05.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190117

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-15-33

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190118

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.24

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190119

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.05.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190120

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.05.05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190121

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.12.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190122

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190123

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190124

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.PLUS.01.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190125

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.PLUS.01.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190126

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.02.25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190127

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.12.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190128

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-07-25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190129

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.05.18.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190130

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-25-12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190131

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.01.36

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190132

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.05.03

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190133

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.05.07

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190134

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.18.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190135

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190136

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190137

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.PLUS.01.03

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190138

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.PLUS.01.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190139

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.03.05.INI

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190140

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.18.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190141

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-15-04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190142

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.05.36.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190143

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US-60-05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190144

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190145

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.05.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190146

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.05.09

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190147

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF77.UL.02.25.D

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190148

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF78.UL.05.25

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190149

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF9.02.18

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190150

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF98.PLUS.01.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190151

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF99.PLUS.02.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190152

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF10.05.04

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190153

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130.02.20.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190154

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF130US-15-05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190155

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140.07.03.UL

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190156

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF140US.05.02

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190157

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF2.02.08

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    4190158

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF5.05.05

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • LAPP

    8201016321

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

  • igus

    CF6.05.12

    Equipment wiring material

    Custom compatible replacements · Original-parts sourcing

Selection & Project Review

01 Application Boundary

MTW, AWM and field-installed wiring have different product and installation scopes; exact marking, location and governing standard must be reviewed.

02 Project Inputs

Provide the market, machine standard, circuit list, route map, exact wire designation, terminal system and validation plan.

03 Release Records

Release records the wire identity, construction, cut and strip details, termination combination, routing, traceability and agreed checks.

04 Interface Review

Confirm the exact mating interface, pin map, dimensions and installation orientation.

05 Sample Acceptance

Agree the sample configuration and electrical, mechanical or environmental checks required by the project.

06 Change Control

Record changes to materials, drawings and process instructions before repeat manufacture.

Send the part number, drawing or sample to confirm the replacement configuration and sourcing plan.

PROJECT REVIEW / CUSTOM MANUFACTURING

Custom Wire Harness Manufacturing in China

Custom wire harness manufacturing from our China factory, with OEM/ODM project support.

A sample, clear connector photos or a description of the equipment and required quantity is enough to start a review.

Discuss Custom Manufacturing & Sourcing

Start with a part number, drawing, sample or equipment requirement.

Information for an accurate quotation

When available, include drawings and BOM, connector and mating part numbers, pinout, wire length and gauge, branch layout, quantity and required tests. Materials, inspection scope and delivery are confirmed for each project.