M12 circular interface formM12圆形接口形式
The M12-form circular end can be oriented around the equipment mating position, handling clearance and cable exit.M12形式的圆形接入端可结合设备对插位置安排方向、操作空间与出线位置。
Binder CompatibleBinder兼容组件
M12 8-Port Sensor Distribution Box HarnessM12接口 · 八口传感器分配盒线束
M12 8-Port Sensor Distribution Box Harness combines m12 circular interface form, distribution-box connection layout. Interface, circuit and installation data guide dimensions, material selection and sample review.M12接口 · 八口传感器分配盒线束的结构重点包括M12圆形接口形式、分配盒接入布局。接口、电路与安装资料将作为尺寸、物料和样品制作的确认依据。
- Interface and circuit review接口与回路对应审核
- Length and installation configuration线长与安装结构定制
- Manufacture from approved sample样品确认后组织制造
CONSTRUCTION结构解析
Connection structure and design details连接结构与设计要点
Use the m12 8-port sensor distribution box harness form as a starting point and confirm these design points against drawings and the actual equipment.以M12接口 · 八口传感器分配盒线束的结构形式为起点，结合图纸和实际设备确认以下设计要点。
Distribution-box connection layout分配盒接入布局
Interfaces gather at a distribution-box connection point, with equipment links arranged around the mounting face and cable directions.接口汇集到分配盒连接位置，可围绕安装面和各出线方向安排设备接入。
Interface and function review接口与功能确认
Equal thread size does not establish equal coding相同螺纹尺寸不证明编码相同
Installation and acceptance安装与验收
Ingress ratings require specified mating and locking conditions额定防护需核对插合与锁紧状态
CONFIGURATION结构与选配
Construction & customization options结构与定制配置
The table describes the construction and available configuration choices. Materials, dimensions, circuits and inspection requirements are agreed for each project.以下说明展示结构与可配置内容。具体材料、尺寸、电路和检验要求按项目确认。
| Binder series, coding and full part numberBinder系列、编码和完整料号 | Include the Binder family, coding and complete part number in the enquiry.Binder系列、编码和完整料号同时纳入询价。 |
|---|---|
| Locking method, contact layout and polarity锁紧方式、接点布局与极性 | Confirm locking, contact layout and polarity against the mating part.锁紧形式、接点排布及极性按对插端确认。 |
| Field-attachable/molded variant and cable entry装配或模制版本及电缆入口 | Define field-assembled or molded form and match the entry clamping diameter.明确装配式或模制式，并匹配入口夹持外径。 |
| Shielding, sealing and mating-test conditions屏蔽、密封及对插测试条件 | Specify test conditions for the mated, locked and installed state.规定插合、锁紧和安装状态下的试验条件。 |
| Installation and operating boundary安装与使用边界 | Provide mating references, wiring views, lengths and the actual environment.提供对插料号、接线视图、长度及实际环境。 |
| Sample and release basis样品与放行依据 | Approve the sample and controlled material and inspection documents.认可样品及受控物料、检验文件。 |
APPLICATIONS连接的应用
Application directions应用方向
These are connection directions for project discussion. Suitability depends on interfaces, circuits, installation conditions and project validation; configuration can be adapted to the equipment.以下为可讨论的连接方向。实际适用性取决于接口、电路、安装环境和项目验证，可按设备需求调整。
Detachable circular connections可拆卸圆形连接
Check gender, keying, coupling and end-face views together. Equal contact counts do not replace confirmation of the exact series and part numbers. Include the Binder family, coding and complete part number in the enquiry.圆形接口需要同时核对公母、键位、锁紧方式和端视图，针数相同并不能替代完整系列与料号确认。选配时，Binder系列、编码和完整料号同时纳入询价。
Terminal wiring inside control cabinets控制柜内的端子配线
Coordinate terminal positions, duct exits and service access within the cabinet. Wire labels should correspond to the circuit table and equipment ports. Confirm locking, contact layout and polarity against the mating part.柜内连接需协调端子位置、线槽出口和可维护空间，线号应能对应回路表与设备端口。选配时，锁紧形式、接点排布及极性按对插端确认。
Shield layers and end terminations屏蔽层与端部接续
Define shield coverage, drain wires and grounding method. Treat shield-continuity checks and system interference testing as separate tasks. Define field-assembled or molded form and match the entry clamping diameter.屏蔽选择需要明确覆盖结构、排流线和接地方式，屏蔽连续性检查与整机抗干扰试验应分别定义。选配时，明确装配式或模制式，并匹配入口夹持外径。
Module wiring within enclosures机箱内部的模块配线
Coordinate board positions, module removal and wire bends within the enclosure. Preserve insulation clearance and support behind each termination. Specify test conditions for the mated, locked and installed state.机箱内部配线需要协调板卡位置、模块拆装和导线转弯空间；端接后的绝缘与支撑不能被外壳挤压。选配时，规定插合、锁紧和安装状态下的试验条件。
Equipment panels and circular interfaces设备面板与圆形接口
Start with the cutout, panel thickness, mounting direction and rear clearance. Coordinate contact arrangement and cable exit with the complete assembly view. Include the Binder family, coding and complete part number in the enquiry.面板连接以开孔、板厚、装配方向和后方净空为起点；接点排列与电缆出口还需要对应完整总装视图。选配时，Binder系列、编码和完整料号同时纳入询价。
Internal machine connections and service设备机内连接与维护
Keep internal connections clear of working zones and moving parts. Allow appropriate cable length between supports, interfaces and service paths. Confirm locking, contact layout and polarity against the mating part.设备机内连接要避开加工区与运动部件，并在固定点、接口和检修路径之间保留合理线缆余量。选配时，锁紧形式、接点排布及极性按对插端确认。
ENGINEERING & PRODUCTION工程与制造
Adapt the connection to your equipment.围绕设备，调整连接细节。
Touched by me, better it’ll beTouched by me, better it’ll be
Custom wire harness manufacturing in China中国工厂 · 定制线束制造
Our China factory supports binder compatible projects through custom wire harness manufacturing and OEM/ODM development. Interface, circuit and installation data guide material selection, sample builds and manufacturing-document approval before repeat production.Super Smile-Tech 中国工厂围绕Binder兼容组件的项目需求提供定制线束制造与 OEM/ODM 支持。我们从接口、电路与安装资料开始，协同物料选配、样品制作和制造文件确认，再按批准要求组织重复生产。
Check the interface and matching parts核对接口与配套件
Include the Binder family, coding and complete part number in the enquiry. Equal thread size does not establish equal coding.Binder系列、编码和完整料号同时纳入询价。 相同螺纹尺寸不证明编码相同。
Define cable and installation conditions定义线材与安装条件
Confirm locking, contact layout and polarity against the mating part. Ingress ratings require specified mating and locking conditions.锁紧形式、接点排布及极性按对插端确认。 额定防护需核对插合与锁紧状态。
Set processing and acceptance requirements确定加工与验收要求
Define field-assembled or molded form and match the entry clamping diameter. The cable clamp range must include the actual diameter.明确装配式或模制式，并匹配入口夹持外径。 线缆夹持范围需包含实际外径。
PRODUCT QUESTIONS产品问答
Product & customization questions产品与定制常见问题
Does the same thread size ensure mating?螺纹尺寸相同就能对插吗？
Equal thread size does not establish equal coding. Include the Binder family, coding and complete part number in the enquiry.相同螺纹尺寸不证明编码相同。Binder系列、编码和完整料号同时纳入询价。
Why must protection requirements identify the locked state?防护条件为什么要注明锁紧状态？
Ingress ratings require specified mating and locking conditions. Confirm locking, contact layout and polarity against the mating part.额定防护需核对插合与锁紧状态。锁紧形式、接点排布及极性按对插端确认。
How is the cable-entry clamping range selected?线缆入口怎样选夹持范围？
The cable clamp range must include the actual diameter. Define field-assembled or molded form and match the entry clamping diameter.线缆夹持范围需包含实际外径。明确装配式或模制式，并匹配入口夹持外径。
Start with your interface and installation requirements从您的接口与安装需求开始
Share mating interfaces, a circuit table, target lengths or a sample for the m12 8-port sensor distribution box harness. We can use them to review configuration and sample requirements.提供M12接口 · 八口传感器分配盒线束的对插接口、回路表、目标长度或参考样品，我们据此梳理选配与样品确认事项。