Circular connection end圆形连接端
The end uses a circular interface form, with connection positions planned around mating direction, retention and cable exit.端头具有圆形接口形式，可围绕对插方向、端部固定和线缆出口规划连接位置。
Prototype & Small-Batch Harness样品与小批量线束
Mixed-interface equipment harness圆形金属接头与多排端子混合线束
Mixed-interface equipment harness combines circular connection end, end transition layout, contact arrangement form. Interface, circuit and installation data guide dimensions, material selection and sample review.圆形金属接头与多排端子混合线束的结构重点包括圆形连接端、端头转接与组合、接点排列形式。接口、电路与安装资料将作为尺寸、物料和样品制作的确认依据。
- Circular connection end圆形连接端
- End transition layout端头转接与组合
- Contact arrangement form接点排列形式
CONSTRUCTION结构解析
Connection structure and design details连接结构与设计要点
Use the mixed-interface equipment harness form as a starting point and confirm these design points against drawings and the actual equipment.以圆形金属接头与多排端子混合线束的结构形式为起点，结合图纸和实际设备确认以下设计要点。
End transition layout端头转接与组合
The assembly organizes a transition or combined connection, with end directions, transition sections and fixing arranged around the equipment positions.组件以转接或组合形式组织连接，可围绕两端设备位置安排端头方向、过渡段与固定。
Contact arrangement form接点排列形式
Contacts are organized in a rowed interface form. Keep insertion direction, end support and cable exit aligned during assembly.接点以成排形式组织在接口中，装配时需要保持插入方向、端头支撑和线缆出口的对应。
Plug-in connection end插接式端头
The end uses a plug-in form, with clearance arranged for insertion, removal and cable bends.端头采用插接形式，可围绕安装位置安排插入、退出及线缆弯曲空间。
CONFIGURATION结构与选配
Construction & customization options结构与定制配置
The table describes the construction and available configuration choices. Materials, dimensions, circuits and inspection requirements are agreed for each project.以下说明展示结构与可配置内容。具体材料、尺寸、电路和检验要求按项目确认。
| Sample revision, quantity and intended use样品版本、数量与目标用途 | Use sample references to distinguish revision, quantity and validation purpose.样品编号区分版本、数量与验证用途。 |
|---|---|
| Unfrozen interfaces, dimensions and materials尚未冻结的接口、尺寸和材料项 | Record unfrozen interfaces, dimensions and substitute materials separately.未冻结接口、尺寸或替代材料单独记录。 |
| Prototype tooling and temporary process limits试制工装与临时工艺适用范围 | Confirm prototype-tool and production-process applicability separately.临时工装与批量工艺分别确认适用范围。 |
| Sample inspection records and production-transfer requirements样品检查记录与批产转移要求 | Convert prototype feedback into drawing, BOM and production checks.将试制反馈转成图纸、BOM与量产检查点。 |
| Circuit and revision reference电路与版本依据 | Provide the current drawing revision, test purpose, must-use parts, acceptable temporary substitutions, quantity, target date and expected next revision.建议提供当前图纸版本、测试目的、必须使用的物料、可接受的临时替代、数量、目标日期和下一版计划，并说明哪些尺寸或功能仍在验证。 |
| Sample and manufacturing configuration样品与制造配置 | A review record identifies assumptions and open points before the sample is built. Feedback is converted into a revised drawing or BOM, and repeat production starts only from the customer-approved revision.打样前通过审核记录列出假设与待确认项；样品反馈转化为新版图纸或BOM，重复生产只依据客户批准的版本启动。 |
APPLICATIONS连接的应用
Application directions应用方向
These are connection directions for project discussion. Suitability depends on interfaces, circuits, installation conditions and project validation; configuration can be adapted to the equipment.以下为可讨论的连接方向。实际适用性取决于接口、电路、安装环境和项目验证，可按设备需求调整。
New machine and fixture development新设备与工装开发
Validates cabinet, sensor, actuator, motor and safety connections while the equipment layout is still being adjusted. Use sample references to distinguish revision, quantity and validation purpose.在设备布局仍调整时验证机柜、传感器、执行器、电机与安全连接。选配时，样品编号区分版本、数量与验证用途。
Pilot production equipment试制生产设备
Supports initial stations, packaging equipment and process modules before quantities and final routing are stable. Record unfrozen interfaces, dimensions and substitute materials separately.支持初始工位、包装设备与工艺模块，在数量和最终布线路径稳定前完成验证。选配时，未冻结接口、尺寸或替代材料单独记录。
Laboratory and test systems实验室与测试系统
Connects instruments, fixtures, sensors and data-acquisition hardware for a defined experiment or verification setup. Confirm prototype-tool and production-process applicability separately.为明确的实验或验证配置连接仪器、工装、传感器与数据采集硬件。选配时，临时工装与批量工艺分别确认适用范围。
Appliance and motor prototypes电器与电机样机
Checks internal routing, motors, heaters, controls and service connections before enclosure and assembly details are finalized. Convert prototype feedback into drawing, BOM and production checks.在外壳与装配细节定型前检查内部布线、电机、加热、控制与维修连接。选配时，将试制反馈转成图纸、BOM与量产检查点。
Robotics and automation trials机器人与自动化试验
Supports new end effectors, motion modules, sensors and controller interfaces through successive engineering revisions. Use sample references to distinguish revision, quantity and validation purpose.支持新末端工具、运动模块、传感器与控制器接口的连续工程迭代。选配时，样品编号区分版本、数量与验证用途。
Specialist and low-volume equipment专业与低用量设备
Suitable for treatment, monitoring, field-service and custom machines whose annual demand remains below conventional mass production. Record unfrozen interfaces, dimensions and substitute materials separately.适用于处理、监测、现场服务与定制设备，其年度需求低于常规大批量生产。选配时，未冻结接口、尺寸或替代材料单独记录。
ENGINEERING & PRODUCTION工程与制造
Adapt the connection to your equipment.围绕设备，调整连接细节。
Touched by me, better it’ll beTouched by me, better it’ll be
Custom wire harness manufacturing in China中国工厂 · 定制线束制造
Our China factory supports prototype & small-batch harness projects through custom wire harness manufacturing and OEM/ODM development. Interface, circuit and installation data guide material selection, sample builds and manufacturing-document approval before repeat production.Super Smile-Tech 中国工厂围绕样品与小批量线束的项目需求提供定制线束制造与 OEM/ODM 支持。我们从接口、电路与安装资料开始，协同物料选配、样品制作和制造文件确认，再按批准要求组织重复生产。
Start from incomplete engineering data从不完整工程资料启动
We can organize drawings, pin tables, photos, marked samples and equipment layouts into a review list that separates confirmed requirements from assumptions.可把图纸、针脚表、照片、标记样品与设备布局整理为审核清单，区分已确认要求与工程假设。
Build for one defined test purpose围绕单一明确测试目的制作
Fit, function, environmental and production-process samples answer different questions. Defining the purpose avoids unnecessary cost and misleading acceptance.装配、功能、环境与生产工艺样品回答的问题不同，先定义目的可避免无效成本和错误验收。
Convert feedback into controlled revisions把反馈转化为受控版本
Every approved change updates the applicable drawing, BOM, pin map, label or inspection requirement so the next build does not depend on memory.每项批准变更同步更新适用图纸、BOM、针脚、标签或检验要求，使下一次制作不依赖口头记忆。
PRODUCT QUESTIONS产品问答
Product & customization questions产品与定制常见问题
How much information is needed to start a prototype?开始打样需要多少资料？
A drawing is helpful but not mandatory. A sample, pin table, connector references, photos and equipment layout can start review when the intended test purpose and open points are stated.图纸最有帮助但不是必须。只要说明测试目的与待确认项，样品、针脚表、接口资料、照片和设备布局也可启动审核。
Can temporary materials be used?可以使用临时物料吗？
They may be used when the customer accepts the substitution and its effect on fit, function or testing is recorded. Temporary parts are not silently converted into the production BOM.客户接受且记录其对装配、功能或测试的影响后可以使用，但临时物料不会未经确认直接进入量产BOM。
Does a working sample mean the design is ready for mass production?样品能工作就代表可以量产吗？
No. A functional sample may still use manual methods, provisional dimensions or unqualified materials. Production release requires a controlled design, repeatable process and agreed inspection plan.不代表。功能样品可能仍使用手工方法、临时尺寸或未完成验证的物料，量产放行需要受控设计、可重复工艺与约定检验计划。
Start with your interface and installation requirements从您的接口与安装需求开始
Share mating interfaces, a circuit table, target lengths or a sample for the mixed-interface equipment harness. We can use them to review configuration and sample requirements.提供圆形金属接头与多排端子混合线束的对插接口、回路表、目标长度或参考样品，我们据此梳理选配与样品确认事项。